Balance The balance of a particular asset for a wallet address.
fields:
owner: Address!
An EOA account represented by 32 bytes.
amount: U64!
The amount of the selected asset id as an unsigned 64 bit number.
assetId: AssetId!
A 32 byte representation of the asset.
BalanceFilterInput The filter input type used to filter the balances query.
fields:
owner: Address!
The owner address of the balances.
Block Information about a block in the network.
fields:
id: BlockId!
A unique identifier for the block.
header: Header!
Metadata about a block.
consensus: Consensus!
The type of consensus used.
transactions: [Transaction!]!
An array of transactions included in the block.
ChainInfo Information about the base chain. At a very high level chainInfo helps you understand what Fuel chain you're connected to and the different parameters of this chain.
fields:
name: String!
The human-readable string name of the chain. i.e. beta-4
latestBlock: Block!
The most recently created block.
baseChainHeight: U32!
Returns 0 (in development mode, this will change). This should return the height of the chain at start.
peerCount: Int!
The number of nodes that node is peered with.
consensusParameters: ConsensusParameters!
The consensus parameters used to validate blocks.
gasCosts: GasCosts!
The gas cost of each opcode.
ChangeOutput A transaction output that changes the unspent coins in a UTXO.
fields:
to: Address!
The recipient address of the coins.
amount: U64!
The amount of coins.
assetId: AssetId!
The asset id for the coins.
Coin Information about a coin.
fields:
utxoId: UtxoId!
A unique 32 byte identifier for a UTXO.
owner: Address!
The owner address of the coins.
amount: U64!
The amount of coins.
assetId: AssetId!
The asset id of the coin.
maturity: U32!
The UTXO being spent must have been created at least this many blocks ago.
blockCreated: U32!
The block when the coins were created.
txCreatedIdx: U64!
The index of the transaction that created this coin.
status:CoinStatus!(beta-3 only)
The status of the coin, either
SPENTorUNSPENT.
CoinFilterInput The filter input type for the coins query.
fields:
owner: Address!
The owner of the coins.
assetId: AssetId
The asset id of the coins.
CoinOutput A type representing a coin output.
fields:
to: Address!
The receiver address of the output coins.
amount: U64!
The amount of coins in the output.
assetId: AssetId!
The asset id for the output coins.
ConsensusParameters The consensus parameters used for validating blocks.
fields:
contractMaxSize: U64!
The maximum contract size, in bytes.
maxInputs: U64!
The maximum number of inputs.
maxOutputs: U64!
The maximum number of outputs.
maxWitnesses: U64!
The maximum number of witnesses.
maxGasPerTx: U64!
The maximum gas per transaction.
maxScriptLength: U64!
The maximum length of a script, in instructions.
maxGasPerPredicate: U64!
The maximum gas per predicate transaction.
maxScriptDataLength: U64!
The maximum length of script data, in bytes.
maxStorageSlots: U64!
The maximum number of initial storage slots.
maxPredicateLength: U64!
The maximum length of a predicate, in instructions.
maxPredicateDataLength: U64!
The maximum length of predicate data, in bytes.
gasPriceFactor: U64!
A factor to convert between gas and the transaction assets value.
gasPerByte: U64!
A fixed ratio linking metered bytes to a gas price.
maxMessageDataLength: U64!
The maximum length of message data, in bytes.
chainId: U64!
A unique identifier for the chain.
Contract An object representing a deployed contract.
fields:
id: ContractId!
The contract address.
bytecode: HexString!
The contract bytecode.
salt: Salt!
A unique identifier for the contract.
ContractBalance An object representing the balance of a deployed contract for a certain asset.
fields:
contract: ContractId!
The contract address.
amount: U64!
The contract balance for the given asset.
assetId: AssetId!
The asset id for the coins.
ContractBalanceFilterInput The filter input type for the contractBalances query.
fields:
contract: ContractId!
The contract id that the query will return balances for.
ContractCreated The output type from deploying a contract.
fields:
contract: Contract!
The contract that was created.
stateRoot: Bytes32!
The initial state root of contract.
ContractOutput The output type from a transaction that changed the state of a contract.
fields:
inputIndex: Int!
The index of the input.
balanceRoot: Bytes32!
The root of amount of coins owned by contract after transaction execution.
stateRoot: Bytes32!
The state root of contract after transaction execution.
DependentCost Contains the dependent cost of opcodes.
fields:
base: U64!
The base gas cost.
depPerUnit: U64!
The dependent gas cost per unit.
ExcludeInput The input type for the resourcesToSpend query that defines what utxos and messages to exclude.
fields:
utxos: [UtxoId!]!
An array of utxo IDs to exclude.
messages: [Nonce!]!
An array of message IDs to exclude.
FailureStatus The status type of a transaction that has failed.
fields:
block: Block!
The block number for the failed transaction.
time: Tai64Timestamp!
The time the transaction failed.
reason: String!
The reason why the transaction failed.
programState: ProgramState
The state of the program execution.
GasCosts The breakdown of the gas costs of each opcode.
fields:
add: U64!
The gas cost of using the $add ALU opcode.
addi: U64!
The gas cost of using the $addi ALU opcode.
aloc: U64!
The gas cost of using the $aloc memory opcode.
and: U64!
The gas cost of using the $and ALU opcode.
andi: U64!
The gas cost of using the $andi ALU opcode.
bal: U64!
The gas cost of using the $bal contract opcode.
bhei: U64!
The gas cost of using the $bhei contract opcode.
bhsh: U64!
The gas cost of using the $bhsh contract opcode.
burn: U64!
The gas cost of using the $burn contract opcode.
cb: U64!
The gas cost of using the $cb contract opcode.
cfei: U64!
The gas cost of using the $cfei memory opcode.
cfsi: U64!
The gas cost of using the $cfsi memory opcode.
croo: U64!
The gas cost of using the $croo contract opcode.
div: U64!
The gas cost of using the $div ALU opcode.
divi: U64!
The gas cost of using the $divi ALU opcode.
ecr1: U64!
The gas cost of using the $ecr1 cryptographic opcode.
eck1: U64!
The gas cost of using the $eck1 cryptographic opcode.
ed19: U64!
The gas cost of using the $ed19 cryptographic opcode.
eq: U64!
The gas cost of using the $eq ALU opcode.
exp: U64!
The gas cost of using the $exp ALU opcode.
expi: U64!
The gas cost of using the $expi ALU opcode.
flag: U64!
The gas cost of using the $flag opcode.
gm: U64!
The gas cost of using the $gm opcode.
gt: U64!
The gas cost of using the $gt opcode.
gtf: U64!
The gas cost of using the $gtf ALU opcode.
ji: U64!
The gas cost of using the $ji control flow opcode.
jmp: U64!
The gas cost of using the $jmp control flow opcode.
jne: U64!
The gas cost of using the $jne control flow opcode.
jnei: U64!
The gas cost of using the $jnei control flow opcode.
jnzi: U64!
The gas cost of using the $jnzi control flow opcode.
jmpf: U64!
The gas cost of using the $jmpf control flow opcode.
jmpb: U64!
The gas cost of using the $jmpb control flow opcode.
jnzf: U64!
The gas cost of using the $jnzf control flow opcode.
jnzb: U64!
The gas cost of using the $jnzb control flow opcode.
jnef: U64!
The gas cost of using the $jnef control flow opcode.
jneb: U64!
The gas cost of using the $jneb control flow opcode.
k256: U64!
The gas cost of using the $k256 cryptographic opcode.
lb: U64!
The gas cost of using the $lb memory opcode.
log: U64!
The gas cost of using the $log contract opcode.
lt: U64!
The gas cost of using the $lt ALU opcode.
lw: U64!
The gas cost of using the $lw memory opcode.
mcpi: U64!
The gas cost of using the $mcpi memory opcode.
mint: U64!
The gas cost of using the $mint contract opcode.
mlog: U64!
The gas cost of using the $mlog ALU opcode.
modOp: U64!
The gas cost of using the $modOp opcode.
modi: U64!
The gas cost of using the $modi ALU opcode.
moveOp: U64!
The gas cost of using the $moveOp ALU opcode.
movi: U64!
The gas cost of using the $movi ALU opcode.
mroo: U64!
The gas cost of using the $mroo ALU opcode.
mul: U64!
The gas cost of using the $mul ALU opcode.
muli: U64!
The gas cost of using the $muli ALU opcode.
mldv: U64!
The gas cost of using the $mldv ALU opcode.
noop: U64!
The gas cost of using the $noop ALU opcode.
not: U64!
The gas cost of using the $not ALU opcode.
or: U64!
The gas cost of using the $or ALU opcode.
ori: U64!
The gas cost of using the $ori ALU opcode.
ret: U64!
The gas cost of using the $ret opcode.
rvrt: U64!
The gas cost of using the $rvrt contract opcode.
s256: U64!
The gas cost of using the $s256 cryptographic opcode.
sb: U64!
The gas cost of using the $sb memory opcode.
scwq: U64!
The gas cost of using the $scwq contract opcode.
sll: U64!
The gas cost of using the $sll ALU opcode.
slli: U64!
The gas cost of using the $slli ALU opcode.
srl: U64!
The gas cost of using the $srl ALU opcode.
srli: U64!
The gas cost of using the $srli ALU opcode.
srw: U64!
The gas cost of using the $srw contract opcode.
sub: U64!
The gas cost of using the $sub ALU opcode.
subi: U64!
The gas cost of using the $subi ALU opcode.
sw: U64!
The gas cost of using the $sw memory opcode.
sww: U64!
The gas cost of using the $sww contract opcode.
swwq: U64!
The gas cost of using the $swwq contract opcode.
time: U64!
The gas cost of using the $time contract opcode.
tr: U64!
The gas cost of using the $tr contract opcode.
tro: U64!
The gas cost of using the $tro contract opcode.
wdcm: U64!
The gas cost of using the $wdcm ALU opcode.
wqcm: U64!
The gas cost of using the $wqcm ALU opcode.
wdop: U64!
The gas cost of using the $wdop ALU opcode.
wqop: U64!
The gas cost of using the $wqop ALU opcode.
wdml: U64!
The gas cost of using the $wdml ALU opcode.
wqml: U64!
The gas cost of using the $wqml ALU opcode.
wddv: U64!
The gas cost of using the $wddv ALU opcode.
wqdv: U64!
The gas cost of using the $wqdv ALU opcode.
wdmd: U64!
The gas cost of using the $wdmd ALU opcode.
wqmd: U64!
The gas cost of using the $wqmd ALU opcode.
wdam: U64!
The gas cost of using the $wdam ALU opcode.
wqam: U64!
The gas cost of using the $wqam ALU opcode.
wdmm: U64!
The gas cost of using the $wdmm ALU opcode.
wqmm: U64!
The gas cost of using the $wqmm ALU opcode.
xor: U64!
The gas cost of using the $xor ALU opcode.
xori: U64!
The gas cost of using the $xori ALU opcode.
call: DependentCost!
The dependent gas cost of using the $call contract opcode.
ccp: DependentCost!
The dependent gas cost of using the $ccp contract opcode.
csiz: DependentCost!
The dependent gas cost of using the $csiz contract opcode.
ldc: DependentCost!
The dependent gas cost of using the $ldc contract opcode.
logd: DependentCost!
The dependent gas cost of using the $logd contract opcode.
mcl: DependentCost!
The dependent gas cost of using the $mcl memory opcode.
mcli: DependentCost!
The dependent gas cost of using the $mcli memory opcode.
mcp: DependentCost!
The dependent gas cost of using the $mcp memory opcode.
meq: DependentCost!
The dependent gas cost of using the $meq memory opcode.
retd: DependentCost!
The dependent gas cost of using the $retd contract opcode.
smo: DependentCost!
The dependent gas cost of using the $smo contract opcode.
srwq: DependentCost!
The dependent gas cost of using the $srwq contract opcode.
Genesis The genesis consensus type.
fields:
chainConfigHash: Bytes32!
The chain configuration hash. The chain configuration defines what consensus type to use, what settlement layer to use, and the rules of block validity.
coinsRoot: Bytes32!
The binary Merkle tree root of all genesis coins.
contractsRoot: Bytes32!
The binary Merkle tree root of state, balances, and the contracts code hash of each contract.
messagesRoot: Bytes32!
The binary merkle tree root of all genesis messages.
Header The header contains metadata about a certain block.
fields:
id: BlockId!
The current block id.
daHeight: U64!
The block height for the data availability layer up to which (inclusive) input messages are processed.
transactionsCount: U64!
The number of transactions in the block.
messageReceiptCount: U64!
The number of receipt messages in the block.
messageReceiptRoot: Bytes32!
The merkle root of the receipt messages in the block.
height: U32!
The block height.
prevRoot: Bytes32!
The merkle root of all previous consensus header hashes (not including this block).
time: Tai64Timestamp!
The timestamp for the block.
applicationHash: Bytes32!
The hash of the serialized application header for this block.
outputMessagesCount:U64!(beta-3 only)
The number of output messages in the block.
outputMessagesRoot:Bytes32!(beta-3 only)
The merkle root of the output messages in the block.
InputCoin Information about a coin input.
fields:
utxoId: UtxoId!
A unique 32 byte identifier for the UTXO.
owner: Address!
The owning address or predicate root.
amount: U64!
The amount of coins.
assetId: AssetId!
The asset ID of the coins.
txPointer: TxPointer!
A pointer to the transaction whose output is being spent.
witnessIndex: Int!
The index of the witness that authorizes spending the coin.
maturity: U32!
The UTXO being spent must have been created at least this many blocks ago.
predicateGasUsed: U64!
The amount of gas used in the predicate transaction.
predicate: HexString!
The predicate bytecode.
predicateData: HexString!
The predicate input parameters.
InputContract Information about a contract input.
fields:
utxoId: UtxoId!
A unique 32 byte identifier for the UTXO.
balanceRoot: Bytes32!
The root of amount of coins owned by contract before transaction execution.
stateRoot: Bytes32!
The state root of contract before transaction execution.
txPointer: TxPointer!
A pointer to the TX whose output is being spent.
contract: Contract!
The input contract.
InputMessage Information about a message input.
fields:
sender: Address!
The sender address of the message.
recipient: Address!
The recipient address of the message.
amount: U64!
The amount sent in the message.
nonce: Nonce!
A nonce value for the message input, which is determined by the sending system and is published at the time the message is sent.
witnessIndex: Int!
The index of witness that authorizes spending the coin.
predicateGasUsed: U64!
The amount of gas used in the predicate transaction.
data: HexString!
The message data.
predicate: HexString!
The predicate bytecode.
predicateData: HexString!
The predicate input parameters.
messageId:MessageId!(beta-3 only)
A unique id for the message. The ID of a message is computed as the hash of:
MerkleProof Information about a merkelproof.
fields:
proofSet: [Bytes32!]!=
The proof set of the message proof.
proofIndex: U64!
The index used to generate this proof.
Message Contains information about a message.
fields:
messageId: MessageId!
A unique id for the message.
amount: U64!
The amount of base asset coins sent with the message.
sender: Address!
The address of the message sender.
recipient: Address!
The recipient of the message.
nonce: Nonce!
The nonce value for the message.
data: [Int!]!
The vector with the message data.
daHeight: U64!
The block height of the data availability layer up to which (inclusive) input messages are processed.
status:MessageStatus(beta-3 only)
The status of the message UTXO.
fuelBlockSpend:U64(beta-2 only)
The block in which the message is spent.
MessageCoin Information about message coin
fields:
sender: Address!
The address of the message sender.
recipient: Address!
The recipient of the message.
nonce: Nonce!
The nonce value for the message.
amount: U64!
The amount of base asset coins sent with the message.
assetId: AssetId
The asset id of the coins transferred.
daHeight: U64!
The block height of the data availability layer up to which (inclusive) input messages are processed.
MessageOutput(beta-3 only)
The output type for a message. When signing a transaction recipient and amount are set to zero. When verifying a predicate or executing a script, recipient and amount are initialized to zero.
fields:
recipient:Address!
The recipient of the message.
amount:U64!
The amount of base asset coins sent with the message.
MessageProof Information about the message proof.
fields:
messageProof: MerkleProof!
The merkle proof of the message.
blockProof: MerkleProof!
The merkle proof of the block.
messageBlockHeader: Header!
The merkle proof of the message.
commitBlockHeader: Header!
The merkle proof of the block.
sender: Address!
The message sender.
recipient: Address!
The message recipient.
nonce: Nonce!
The message nonce.
amount: U64!
The amount sent in the message.
data: HexString!
The data from the message.
proofSet:[Bytes32!]!(beta-3 only)
The proof set of the message proof.
proofIndex:U64!(beta-3 only)
The index used to generate this proof.
signature:Signature!(beta-3 only)
The signature of the Fuel block.
header:Header!(beta-3 only)
The Fuel block header that contains the message.
NodeInfo Information about a node.
fields:
utxoValidation: Boolean!
Whether or not the node is using UTXO validation.
vmBacktrace: Boolean!
Whether or not logging of backtraces from VM errors is enabled.
minGasPrice: U64!
The minimum gas price for the node.
maxTx: U64!
The maximum number of transactions.
maxDepth: U64!
The maximum number of connected UTXOs allowed, excluding contracts.
nodeVersion: String!
The node version.
PoAConsensus The proof-of-authority (PoA) consensus type.
fields:
signature: Signature!
The signature of the block produced by PoA consensus.
ProgramState An object representing the state of execution of a transaction.
fields:
returnType: ReturnType!
The type of return response for the transaction.
data: HexString!
The data returned from the transaction.
Receipt An object representing all possible types of receipts.
fields:
contract: Contract
The contract that produced the receipt.
pc: U64
The value of the program counter register $pc, which is the memory address of the current instruction.
is: U64
The value of register $is, which is the pointer to the start of the currently-executing code.
to: Contract
The recipient contract.
toAddress: Address
The recipient address.
amount: U64
The amount of coins transferred.
assetId: AssetId
The asset id of the coins transferred.
gas: U64
The gas used for the transaction.
param1: U64
The first parameter for a CALL receipt type, holds the function selector.
param2: U64
The second parameter for a CALL receipt type, typically used for the user-specified input to the ABI function being selected.
val: U64
The value of registers at the end of execution, used for debugging.
ptr: U64
The value of the pointer register, used for debugging.
digest: Bytes32
A 32-byte hash of MEM[$rC, $rD]. The syntax MEM[x, y] means the memory range starting at byte x, of length y bytes.
reason: U64
The decimal string representation of an 8-bit unsigned integer for the panic reason. Only returned if the receipt type is PANIC.
ra: U64
The value of register $rA.
rb: U64
The value of register $rB.
rc: U64
The value of register $rC.
rd: U64
The value of register $rD.
len: U64
The length of the receipt.
receiptType: ReceiptType!
The type of receipt.
result: U64
0 if script exited successfully, any otherwise.
gasUsed: U64
The amount of gas consumed by the script.
data: HexString
The receipt data.
sender: Address
The address of the message sender.
recipient: Address
The address of the message recipient.
nonce: Nonce
The nonce value for a message.
contractId: ContractId
The contract id.
subId: Bytes32
The sub id.
rawPayload:HexString!(beta-3 only)
The raw payload hex string.
messageId:MessageId(beta-3 only)
The message id.
SpendQueryElementInput A type used in the queryPerAsset argument for the resourcesToSpend query.
fields:
assetId: AssetId!
The asset id for the asset.
amount: U64!
The amount of coins to send.
max: U64
The max number of resources in the selection.
SqueezedOutStatus The status for a transaction that was squeezed out of the transaction pool.
fields:
reason: String!
The reason why the transaction was squeezed out.
SuccessStatus The status of a successful transaction.
fields:
block: Block!
The block of the transaction.
time: Tai64Timestamp!
The time of the transaction.
programState: ProgramState
The state of the program execution.
SubmittedStatus The status for a submitted transaction.
fields:
time: Tai64Timestamp!
The time a transaction was submitted
An object containing information about block times
fields:
startTime: U64
The time to set on the first block.
blockTimeInterval: U64
The time interval between subsequent blocks.
Transaction An object containing information about a transaction.
fields:
id: TransactionId!
A unique transaction id.
inputAssetIds: [AssetId!]
An array of asset ids used for the transaction inputs.
inputContracts: [Contract!]
An array of contracts used for the transaction inputs.
gasPrice: U64
The gas price for the transaction.
gasLimit: U64
The gas limit for the transaction.
maturity: U32
The minimum block height that the transaction can be included at.
txPointer: TxPointer
The location of the transaction in the block.
isScript: Boolean!
Whether or not the transaction is a script.
isCreate: Boolean!
Whether or not the transaction is creating a new contract.
isMint: Boolean!
Whether or not the transaction is minting new coins.
inputs: [Input!]
An array of inputs for the transaction.
outputs: [Output!]!
An array of outputs for the transaction.
witnesses: [HexString!]
An array of witnesses.
receiptsRoot: Bytes32
The root of the receipts.
status: TransactionStatus
The status of the transaction.
receipts: [Receipt!]
An array of the receipts produced by the transaction.
script: HexString
The script to execute.
scriptData: HexString
The script input parameters.
bytecodeWitnessIndex: Int
The witness index of contract bytecode.
bytecodeLength: U64
The length of the transaction bytecode.
salt: Salt
The salt value for the transaction.
storageSlots: [HexString!]
An array of storage slot.
rawPayload: HexString!
A hex string of the raw transaction payload.
VariableOutput The output type for a transaction that outputs an amount that may vary based on transaction execution.
fields:
to: Address
The address the coins were sent to.
amount: U64
The amount of coins in the output.
assetId: AssetId
The asset id for the coins sent.
Was this page helpful?